WHITES BELT TENSION GAUGE
The Whites Belt Tension Gauge can be used to adjust belt tension on most motorcycles equipped with a secondary drive belt, the gauge provides a simple way to confirm the belt for proper tension. Correctly tensioned and aligned belts prevent premature wear on the whole of the drive chain. Ideal for use after a belt replacement or wheel servicing, constructed with a 1″ to 3.5″ scale for quick and easy measurement.
Easy to use and read
The gauge allows for accurate belt tension to be set
Use after belt replacement/adjustment or wheel service
Use on secondary drive belts with 10 pounds specification
1″ to 3.5″ scale
Directions For Use:
1. Position the small O-ring over the 10 lb. mark.
2. Position the U-shaped belt cradle against the bottom of the belt at a 90-degree angle and locate the large O-ring to a reference point, record reading.
3. Push upward on the rubber bumper until the small O-ring touches the bottom of the tool body. Re-align the large O-ring to the reference point, the difference in the reading is the belt deflection (refer to service manual for specification).
Wrench, Ride, Repeat.
MOTUL 100 2T Motomix 2T$17.95 – $62.95
MOTUL 3000 Plus 4T Syn HC Tech 10W30$14.95 – $52.95
MOTUL 3000 Plus 4T Synth Fort 10W40$14.95 – $52.95
MOTUL 3000 Plus 4T Synth Fort 15W50$14.95 – $52.95
MOTUL 300V 4T Factory Line 10W40$35.95 – $129.95
MOTUL 300V 4T Factory Line 15W50$35.95 – $129.95
MOTUL 300V 4T Factory Line 15W60$34.95 – $129.95
MOTUL 300V 4T Factory Line 5W30$35.95 – $129.95