MOTUL C5 Chain Paste 150ml

MOTUL C5 Chain Paste 150ml

Motul Chain Paste is a white lubricating paste with a brush applicator tip, specially formulated to lubricate all road motorcycle and kart chains of the standard type or O-Ring, X-Ring, or Z-Ring.

Clean the chain well with Motul Chain Clean, then apply the paste taking care to spread it evenly over all of it using the brush applicator tip. A little quantity suffices to lubricate all the chain. Do not apply too thick a layer; spread evenly to achieve an approximately uniform 0,1 mm protective film. Motul Chain Paste adheres well to the chain, which avoids fling-off at high speed, offering low rolling resistance for more power. The product increases chain durability thanks to its excellent anti-wear properties, reducing friction, being resistant to water and salt, and protecting against rust. Practical, economical, and non-flammable, the compact Motul Chain Paste tube can be stored without risk under a motorcycle saddle. A 150 ml tube does about ten applications.

  • Reduces rolling friction and loss of power.
  • Improves transmission performance and increases chain service life.
  • Retains its lubricant properties at very high temperatures.
  • Water, salt and rust resistant, preventing corrosion.
  • Protects O-rings, X-rings and Z-rings.
  • Contains a solvent to eliminate old residue and to penetrate into the links.
  • Compatible with all types of chain.
  • Practical, cost effective, not cumbersome and non-flammable.
  • Easy to store under the seat of the bike.
  • One 150ml tube allows about 10 applications.
  • The chain must be cleaned with Motul Chain Clean prior to the use of Motul Chain Paste.
  • Apply the paste and spread it on the whole length of the chain using the brush tip applicator.
  • A small quantity of paste is enough to lubricate all the chain. Do not apply a thick layer of paste.
  • Spread the paste on the whole chain and especially the inner parts until there is a thin and homogenous layer.
  • Motul Chain Paste adheres completely after a few minutes.
Motul Chain Clean Range

Motul Chain Clean Range

Motul Chain Clean cleans all types of motorcycle chains (road and off-road) and those of other vehicles (bicycle, moped, go-kart, ATV…).

Motul Chain Clean uses no chlorine and features an extremely powerful degreasing agent which removes crusted residues that increase wear: dust, sand, earth and oil. If the chain is very dirty, clean with a non-abrasive brush and repeat as often as necessary. Leave to dry for 5 minutes, then lubricate with Motul Chain Lube or Chain Paste. Always spray the chain with Motul Chain Clean before lubricating. Compatible with all types of chains: standard or O’ring, X’ring and Z’ring.

  • Shake well before use.
  • Spray the chain both inside and outside.
  • Let dry for 5 minutes
  • To increase the lifespan of the chain, repeat every 1000 km.
MOTUL Chain Lube Factory Line Boron 

MOTUL Chain Lube Factory Line Boron 

A highly sticky lubricant for motorcycle chains, Motul Chain Lube Factory Line (Chain Lube Plus) does not harm O-ring seals. Its extreme clinging properties prevent fling-off at extreme high speeds. Recommended for high performance motorcycles and racing karts. Shake before use and apply evenly onto all parts of the chain.

  • Based on solid additives AW/EP formulation (anti-wear and extreme pressure)
  • Reduces rolling friction and loss of power.
  • Improves transmission performance and increases chain service life.
  • Retains its lubricant properties at very high temperatures.
  • Water and rust resistant, preventing corrosion.
  • Protects O-rings, X-rings and Z-rings.
  • Contains a solvent to eliminate old residue and to penetrate into the links.
  • Compatible with all types of chain.
  • White colour for easier application.
  • Clean the chain with MOTUL CHAIN CLEAN.
  • Shake well before use.
  • Apply thoroughly to the whole length of the inner chain.
  • Leave to dry for 10 minutes to ensure adherence.
Motul Chain Lube Road Range

Motul Chain Lube Road Range

A colorless water and rust resistant adhesive spray that coats motorcycle chains even at high speeds, reducing high speed splatter. Especially recommended for very fast motorcycles, Chain Lube Road reduces friction and increases chain durability.

  • Reduces rolling friction and loss of power.
  • Improves transmission performance and increases chain service life.
  • Retains its lubricant properties at very high temperatures.
  • Water and rust resistant, preventing corrosion.
  • Protects the O-rings.
  • Contains a solvent to eliminate old residue and to penetrate into the links.
  • Compatible with all types of chain.
  • Clean the chain with MOTUL CHAIN CLEAN.
  • Shake well before use.
  • Apply thoroughly to the whole length of the inner chain.
  • Leave to dry for a few minutes to ensure adherence.