Motul Chain Clean Range

Motul Chain Clean Range

by | Jun 11, 2020 | , , ,

Motul Chain Clean cleans all types of motorcycle chains (road and off-road) and those of other vehicles (bicycle, moped, go-kart, ATV…).

Motul Chain Clean uses no chlorine and features an extremely powerful degreasing agent which removes crusted residues that increase wear: dust, sand, earth and oil. If the chain is very dirty, clean with a non-abrasive brush and repeat as often as necessary. Leave to dry for 5 minutes, then lubricate with Motul Chain Lube or Chain Paste. Always spray the chain with Motul Chain Clean before lubricating. Compatible with all types of chains: standard or O’ring, X’ring and Z’ring.

  • Shake well before use.
  • Spray the chain both inside and outside.
  • Let dry for 5 minutes
  • To increase the lifespan of the chain, repeat every 1000 km.
MOTUL Chain Lube Factory Line Boron 

MOTUL Chain Lube Factory Line Boron 

by | Jun 11, 2020 | , , ,

A highly sticky lubricant for motorcycle chains, Motul Chain Lube Factory Line (Chain Lube Plus) does not harm O-ring seals. Its extreme clinging properties prevent fling-off at extreme high speeds. Recommended for high performance motorcycles and racing karts. Shake before use and apply evenly onto all parts of the chain.

  • Based on solid additives AW/EP formulation (anti-wear and extreme pressure)
  • Reduces rolling friction and loss of power.
  • Improves transmission performance and increases chain service life.
  • Retains its lubricant properties at very high temperatures.
  • Water and rust resistant, preventing corrosion.
  • Protects O-rings, X-rings and Z-rings.
  • Contains a solvent to eliminate old residue and to penetrate into the links.
  • Compatible with all types of chain.
  • White colour for easier application.
  • Clean the chain with MOTUL CHAIN CLEAN.
  • Shake well before use.
  • Apply thoroughly to the whole length of the inner chain.
  • Leave to dry for 10 minutes to ensure adherence.
Motul Chain Lube Road Range

Motul Chain Lube Road Range

by | Jun 11, 2020 | , , ,

A colorless water and rust resistant adhesive spray that coats motorcycle chains even at high speeds, reducing high speed splatter. Especially recommended for very fast motorcycles, Chain Lube Road reduces friction and increases chain durability.

  • Reduces rolling friction and loss of power.
  • Improves transmission performance and increases chain service life.
  • Retains its lubricant properties at very high temperatures.
  • Water and rust resistant, preventing corrosion.
  • Protects the O-rings.
  • Contains a solvent to eliminate old residue and to penetrate into the links.
  • Compatible with all types of chain.
  • Clean the chain with MOTUL CHAIN CLEAN.
  • Shake well before use.
  • Apply thoroughly to the whole length of the inner chain.
  • Leave to dry for a few minutes to ensure adherence.
MOTUL Ezy Lube

MOTUL Ezy Lube

by | Jun 11, 2020 | , , ,

Motul EZ Lube is a multi-function lubricant which unblocks, lubricates and leaves a protective film.

Motul EZ Lube lubricates all mechanisms; brake levers, cables, pins and rods; clutches; shock absorbers; rubber seals that have become dried out; and it unblocks oxidised mechanical systems (nuts, locks, etc.). The product clears water and humidity from electrical circuits, spark plugs and starters. Particularly recommended for application following high-pressure steam washing of motorcycles, Motul EZ Lube protects against corrosion by leaving a protective film on the engine, exhaust, cycle part and other unprotected metallic parts.

  • Shake well before use.
  • Use the pipette for accurate lubrication.
  • Use only the diffuser to spray on large surfaces : for finishing use a soft rag.
  • Flammable gas container : Do not spray near naked flame or source of heat.