MOTUL Air Filter Wash Kit

MOTUL Air Filter Wash Kit

by | Jun 11, 2020 | ,

Motul Air Filter Wash Kit

A comprehensive kit that contains everything you require to stay on top of your air filter maintenance. No-one enjoys cleaning air filters, but this kit makes it as easy as possible.

  • Air Filter Oil– Industry leading air filter oil, providing improved air filter efficiency for better carburation. Effectively retains dust, mud and sand for greater engine durability. Prevents water from entering the filter.
  • Grease– Multipurpose High performance grease. Used to grease the outer rim of the air filter to provide a seal against the airbox to ensure no dirt or dust enters the motor.
  • Filter Clean – Specially formulated for foam air filters. Removes dirt and breaks down air filter oil. Contains a detergent to ensure a thorough clean by simply rinsing with water.
  • Drying Rack – Used inside the wash bucket to provide a seperation from sediment during the cleaning process. Conveniently doubles as a drying rack for the freshly cleaned air filter.
  • Container – Store your excessive Air Filter Oil ready for reuse.
  • Bucket – Perfect sized bucket to wash your dirty Air Filters.

MOTUL BUCKET / AIR FILTER WASH KIT

MOTUL Brake Clean Contact Cleaner

MOTUL Brake Clean Contact Cleaner

by | Jun 11, 2020 | , , ,

Motul Brake Clean is an extremely powerful, non-chlorine, degreasing agent, ideal for brake discs and drums, as well as all other mechanical parts exposed to dirt.

Shake well before use. Spray a short distance away from the surfaces to be degreased. Motul Brake Clean is recommended for brake levers, pins and rods, clutches, chain guides and tighteners, and swing arms. The product eliminates all traces of oil, grease, rubber, tar, and also brake pad dust. Motul Brake Clean dissolves very quickly, it leaves no stains. Do not use on plastics, or painted or varnished surfaces.

MOTUL C5 Chain Paste 150ml

MOTUL C5 Chain Paste 150ml

by | Jun 11, 2020 | , , ,

Motul Chain Paste is a white lubricating paste with a brush applicator tip, specially formulated to lubricate all road motorcycle and kart chains of the standard type or O-Ring, X-Ring, or Z-Ring.

Clean the chain well with Motul Chain Clean, then apply the paste taking care to spread it evenly over all of it using the brush applicator tip. A little quantity suffices to lubricate all the chain. Do not apply too thick a layer; spread evenly to achieve an approximately uniform 0,1 mm protective film. Motul Chain Paste adheres well to the chain, which avoids fling-off at high speed, offering low rolling resistance for more power. The product increases chain durability thanks to its excellent anti-wear properties, reducing friction, being resistant to water and salt, and protecting against rust. Practical, economical, and non-flammable, the compact Motul Chain Paste tube can be stored without risk under a motorcycle saddle. A 150 ml tube does about ten applications.

  • Reduces rolling friction and loss of power.
  • Improves transmission performance and increases chain service life.
  • Retains its lubricant properties at very high temperatures.
  • Water, salt and rust resistant, preventing corrosion.
  • Protects O-rings, X-rings and Z-rings.
  • Contains a solvent to eliminate old residue and to penetrate into the links.
  • Compatible with all types of chain.
  • Practical, cost effective, not cumbersome and non-flammable.
  • Easy to store under the seat of the bike.
  • One 150ml tube allows about 10 applications.
  • The chain must be cleaned with Motul Chain Clean prior to the use of Motul Chain Paste.
  • Apply the paste and spread it on the whole length of the chain using the brush tip applicator.
  • A small quantity of paste is enough to lubricate all the chain. Do not apply a thick layer of paste.
  • Spread the paste on the whole chain and especially the inner parts until there is a thin and homogenous layer.
  • Motul Chain Paste adheres completely after a few minutes.
MOTUL Carbu Clean

MOTUL Carbu Clean

by | Jun 11, 2020 | , , ,

Motul Carbu Clean is a carburettor cleaner specially developed to eliminate deposits and varnish on butterfly valves, bushels, jets, tanks, floats and venturis.

Remove the air intake, start the engine, then spray Motul Carbu Clean through the carburettor air intake. Repeat, if necessary.

For thorough cleaning, stop the engine, disassemble the carburettor, then spray the product on the parts to be cleaned: butterfly valves, bushels, jets, tanks, floats and venturis. Leave to work for 5 to 10 minutes. Repeat, if necessary.

Motul Carbu Clean stabilises the idle and improves engine acceleration.

Motul Chain Clean Range

Motul Chain Clean Range

by | Jun 11, 2020 | , , ,

Motul Chain Clean cleans all types of motorcycle chains (road and off-road) and those of other vehicles (bicycle, moped, go-kart, ATV…).

Motul Chain Clean uses no chlorine and features an extremely powerful degreasing agent which removes crusted residues that increase wear: dust, sand, earth and oil. If the chain is very dirty, clean with a non-abrasive brush and repeat as often as necessary. Leave to dry for 5 minutes, then lubricate with Motul Chain Lube or Chain Paste. Always spray the chain with Motul Chain Clean before lubricating. Compatible with all types of chains: standard or O’ring, X’ring and Z’ring.

  • Shake well before use.
  • Spray the chain both inside and outside.
  • Let dry for 5 minutes
  • To increase the lifespan of the chain, repeat every 1000 km.
MOTUL Chain Lube Factory Line Boron 

MOTUL Chain Lube Factory Line Boron 

by | Jun 11, 2020 | , , ,

A highly sticky lubricant for motorcycle chains, Motul Chain Lube Factory Line (Chain Lube Plus) does not harm O-ring seals. Its extreme clinging properties prevent fling-off at extreme high speeds. Recommended for high performance motorcycles and racing karts. Shake before use and apply evenly onto all parts of the chain.

  • Based on solid additives AW/EP formulation (anti-wear and extreme pressure)
  • Reduces rolling friction and loss of power.
  • Improves transmission performance and increases chain service life.
  • Retains its lubricant properties at very high temperatures.
  • Water and rust resistant, preventing corrosion.
  • Protects O-rings, X-rings and Z-rings.
  • Contains a solvent to eliminate old residue and to penetrate into the links.
  • Compatible with all types of chain.
  • White colour for easier application.
  • Clean the chain with MOTUL CHAIN CLEAN.
  • Shake well before use.
  • Apply thoroughly to the whole length of the inner chain.
  • Leave to dry for 10 minutes to ensure adherence.