MOTUL Brake Clean Contact Cleaner

MOTUL Brake Clean Contact Cleaner

Motul Brake Clean is an extremely powerful, non-chlorine, degreasing agent, ideal for brake discs and drums, as well as all other mechanical parts exposed to dirt.

Shake well before use. Spray a short distance away from the surfaces to be degreased. Motul Brake Clean is recommended for brake levers, pins and rods, clutches, chain guides and tighteners, and swing arms. The product eliminates all traces of oil, grease, rubber, tar, and also brake pad dust. Motul Brake Clean dissolves very quickly, it leaves no stains. Do not use on plastics, or painted or varnished surfaces.

MOTUL Carbu Clean

MOTUL Carbu Clean

Motul Carbu Clean is a carburettor cleaner specially developed to eliminate deposits and varnish on butterfly valves, bushels, jets, tanks, floats and venturis.

Remove the air intake, start the engine, then spray Motul Carbu Clean through the carburettor air intake. Repeat, if necessary.

For thorough cleaning, stop the engine, disassemble the carburettor, then spray the product on the parts to be cleaned: butterfly valves, bushels, jets, tanks, floats and venturis. Leave to work for 5 to 10 minutes. Repeat, if necessary.

Motul Carbu Clean stabilises the idle and improves engine acceleration.

MOTUL Ezy Lube

MOTUL Ezy Lube

Motul EZ Lube is a multi-function lubricant which unblocks, lubricates and leaves a protective film.

Motul EZ Lube lubricates all mechanisms; brake levers, cables, pins and rods; clutches; shock absorbers; rubber seals that have become dried out; and it unblocks oxidised mechanical systems (nuts, locks, etc.). The product clears water and humidity from electrical circuits, spark plugs and starters. Particularly recommended for application following high-pressure steam washing of motorcycles, Motul EZ Lube protects against corrosion by leaving a protective film on the engine, exhaust, cycle part and other unprotected metallic parts.

  • Shake well before use.
  • Use the pipette for accurate lubrication.
  • Use only the diffuser to spray on large surfaces : for finishing use a soft rag.
  • Flammable gas container : Do not spray near naked flame or source of heat.
MOTUL Tyre Repair Aero

MOTUL Tyre Repair Aero

Repairs and reinflates tyres (with or without tubes) instantly and conveniently. TYRE REPAIR (ANTI CREVAISON) consists of mainly latex that does not damage your tires. Use TYRE REPAIR (ANTI CREVAISON) for temporary remedy to faulty tyres.

The MOTUL TYRE REPAIR container is pressurized and permits all types of tyres to be reinflated, for tyres over 15″, a second spray might be necessary.

Enables several hundred kilometres to be covered before repairing using the traditional methods.

Shock-resistant aluminium spray.

  • Remove if possible the object which caused the puncture.
  • Position the tyre valve at the top.
  • Completely deflate the tyre.
  • Shake vigorously MOTUL TYRE REPAIR.
  • In cold weather, reheat it in your hands or near the engine.
  • Clean the screw on the valve.
  • Screw on the MOTUL TYRE REPAIR connector.
  • Remove the protection capsule.
  • Position the spray upside down.
  • Press the button until the tyre is totally reinflated.
  • Drive immediately for 10 to 20 km at moderate speed so that the product is evenly distributed.
  • Control the pressure as soon as possible and during the following days and adjust it.