WHITES BELT TENSION GAUGE

WHITES BELT TENSION GAUGE

The Whites Belt Tension Gauge can be used to adjust belt tension on most motorcycles equipped with a secondary drive belt, the gauge provides a simple way to confirm the belt for proper tension. Correctly tensioned and aligned belts prevent premature wear on the whole of the drive chain. Ideal for use after a belt replacement or wheel servicing, constructed with a 1″ to 3.5″ scale for quick and easy measurement.

Easy to use and read
The gauge allows for accurate belt tension to be set
Use after belt replacement/adjustment or wheel service
Use on secondary drive belts with 10 pounds specification
1″ to 3.5″ scale

Directions For Use:
1. Position the small O-ring over the 10 lb. mark.
2. Position the U-shaped belt cradle against the bottom of the belt at a 90-degree angle and locate the large O-ring to a reference point, record reading.
3. Push upward on the rubber bumper until the small O-ring touches the bottom of the tool body. Re-align the large O-ring to the reference point, the difference in the reading is the belt deflection (refer to service manual for specification).

WHITES BELT TENSION GAUGE

WHITES BELT TENSION GAUGE

The Whites Belt Tension Gauge can be used to adjust belt tension on most motorcycles equipped with a secondary drive belt, the gauge provides a simple way to confirm the belt for proper tension. Correctly tensioned and aligned belts prevent premature wear on the whole of the drive chain. Ideal for use after a belt replacement or wheel servicing, constructed with a 1″ to 3.5″ scale for quick and easy measurement.

Easy to use and read
The gauge allows for accurate belt tension to be set
Use after belt replacement/adjustment or wheel service
Use on secondary drive belts with 10 pounds specification
1″ to 3.5″ scale

Directions For Use:
1. Position the small O-ring over the 10 lb. mark.
2. Position the U-shaped belt cradle against the bottom of the belt at a 90-degree angle and locate the large O-ring to a reference point, record reading.
3. Push upward on the rubber bumper until the small O-ring touches the bottom of the tool body. Re-align the large O-ring to the reference point, the difference in the reading is the belt deflection (refer to service manual for specification).

WHITES CHAIN ALIGNMENT TOOL

WHITES CHAIN ALIGNMENT TOOL

The Whites Chain Alignment Tool is designed to simplify alignment of the countershaft and rear sprockets during chain adjustment or wheel installation. The tool simply clamps to the rear sprocket with the alignment rod pointing toward the front sprocket, the rod will indicate the sprockets alignment and the rear wheel can be adjusted until both sprockets align. Compatible with motorbikes and ATVs with a 420-630 chain.

Indicates sprocket alignment
Simply clamps to rear sprocket with indicator rod pointing forward
Prevents excessive sprocket and chain wear
Compatible with chain sizes 420-630
Lightweight anodised aluminium body
Nylon bolt prevents damage to the rear sprocket

WHITES CHAIN ALIGNMENT TOOL

WHITES CHAIN ALIGNMENT TOOL

The Whites Chain Alignment Tool is designed to simplify alignment of the countershaft and rear sprockets during chain adjustment or wheel installation. The tool simply clamps to the rear sprocket with the alignment rod pointing toward the front sprocket, the rod will indicate the sprockets alignment and the rear wheel can be adjusted until both sprockets align. Compatible with motorbikes and ATVs with a 420-630 chain.

Indicates sprocket alignment
Simply clamps to rear sprocket with indicator rod pointing forward
Prevents excessive sprocket and chain wear
Compatible with chain sizes 420-630
Lightweight anodised aluminium body
Nylon bolt prevents damage to the rear sprocket

WHITES MASTER LINK PLIERS

WHITES MASTER LINK PLIERS

Many chains use a master link to secure the chain together, the Whites Master Link Pliers make removal and replacement of the master link quick and effortless. Insert the jaws into the master link and tighten the forcing screw until the link is separated. Compatible with 25, 415, 420, 425 and 428 sized chains.

Rubber handle provides additional grip
Compatible with 25, 415, 420, 425 and 428 chain sizes
Significantly simplifies master link installation

WHITES MASTER LINK PLIERS

WHITES MASTER LINK PLIERS

Many chains use a master link to secure the chain together, the Whites Master Link Pliers make removal and replacement of the master link quick and effortless. Insert the jaws into the master link and tighten the forcing screw until the link is separated. Compatible with 25, 415, 420, 425 and 428 sized chains.

Rubber handle provides additional grip
Compatible with 25, 415, 420, 425 and 428 chain sizes
Significantly simplifies master link installation

WHITES SS SWINGARM CHAIN ADJUSTING TOOL

WHITES SS SWINGARM CHAIN ADJUSTING TOOL

The Whites Chain Adjusting Tool is a tool specifically designed for chain adjustment on single-sided swingarm motorcycles. The tool is used to tighten the eccentric hub on single-sided swingarm bikes that tightens the chain. Constructed from 304 stainless steel for exceptional strength, durability and corrosion resistance.

Compatible with single-sided swingarm bikes
Used to turn the eccentric hub which tightens the chain
Stainless steel construction for strength and durability
Corrosion resistant

WHITES SS SWINGARM CHAIN ADJUSTING TOOL

WHITES SS SWINGARM CHAIN ADJUSTING TOOL

The Whites Chain Adjusting Tool is a tool specifically designed for chain adjustment on single-sided swingarm motorcycles. The tool is used to tighten the eccentric hub on single-sided swingarm bikes that tightens the chain. Constructed from 304 stainless steel for exceptional strength, durability and corrosion resistance.

Compatible with single-sided swingarm bikes
Used to turn the eccentric hub which tightens the chain
Stainless steel construction for strength and durability
Corrosion resistant